As a rule, we monitor the composition of the products we eat and carefully study what the cosmetics we use are made of. But at the same time, we do not think at all about what my floors and other surfaces in the house are. But in vain: the right tool not only cleans the floor covering well, but also significantly prolongs its life.
They reduce Does anyone know what’s “actually” in floor cleaner? This cleaning expert tells all / Well + Good the surface tension of the water and help to remove dirt, grease or oil. Surfactant molecules come into contact with the contaminant and easily remove what water cannot handle.
They also help Does anyone know what’s “actually” in floor cleaner? This cleaning expert tells all / Well + Good fight fat. That is why solvents must be present in cleaning products not only for the floor, but also for kitchen surfaces.
Minerals like magnesium and zinc are good for our body, but not for the floor. Chelating agents increase the effectiveness of the cleaning agent and allow you to remove Does anyone know what’s “actually” in floor cleaner? This cleaning expert tells all / Well + Good similar harmful particles from surfaces.
They protect the cleanser itself from bacteria and any other influences harmful to its composition.
Formulations with an unsuitable formula can seriously damage the floor covering. First of all, you need to pay attention to the pH level — a measure of acidity. Cleaning products are divided into acidic (pH less than 7), neutral (pH equal to 7) and alkaline (pH greater than 7). It is better to choose options with a neutral indicator — too aggressive solutions can leave traces, especially on the parquet.
If you need the softest and safest remedy possible, look for an eco-friendly one. It costs more, but does not contain components harmful to health and gender.
Substances that can The best way to clean any types of floor / Real Simple there is not much harm to this coating. The laminate owes its strength to the upper layer. It protects the surface from wear and prevents it from fading in the sun, for example. In order for these properties to last longer, it is important not to let water get under the laminate.
Experts recommend wiping such floors with a dry cloth or vacuuming in a special tile mode. Wet cleaning should be carried out only in heavily polluted areas. If you use detergent, apply it on a cloth, not on the floor.
Steam cleaning is best avoided: hot air will disrupt the structure of the material and damage the decorative film. Also, it is not necessary to polish the laminate, it is better to replace it.The main dangers for him are sand and fine dirt that we bring from the street. Therefore, before wet cleaning, it is necessary to make a dry one.
Acidic, alkaline and abrasive products, as well as acetone-based formulations and solvents for linoleum are not suitable. But it can also be cleaned with a self-prepared solution.
Add a few drops of dishwashing liquid to hot water and pour it into a spray bottle. Treat the floor with a solution and wipe with a damp microfiber cloth. After such cleaning, the linoleum should dry fairly quickly. If the floors still feel slightly sticky, wipe them again with a cloth soaked in water.
Many oils for parquet boards contain The best way to clean any types of floor / Real Simple polyurethane additives or wax. If you are not sure what kind of protective layer your floor has, swipe your finger over it. There was a trace left — most likely wax on top. In this case, dry cleaning and vacuuming of the floors should be carried out.
In general, it is better to use gentle, gentle products for any kind of parquet. You can prepare a cleaning solution yourself. To do this, add ¼ cup of liquid soap with a neutral pH level to a bucket of water. Use a microfiber cloth for cleaning, do not forget to squeeze it out carefully and make sure that water does not flow into the cracks between the boards.
Tile and porcelain stoneware surfaces practically do not collect dirt. However, taking care of them still requires thoroughness.
Acid-containing and abrasive products should not be used for cleaning tiled floors. They can damage not only the material itself, but also the connecting cement seams.
At the same time, home remedies for tiles cope with dirt no worse than store-bought ones. Mix ¼ cup vinegar with one drop of dishwashing liquid and warm water in a half‑liter spray bottle. Gradually treat the floor with this solution, and then wipe with a damp microfiber cloth.
For infrequent general cleaning, a steam cleaner is useful. It will remove stains and bacteria at the same time.
The tiled floor can be wiped with a woolen cloth after washing: the surface will shine, and the seams will be less dirty.
When caring for natural stone floors, you should stay away from vinegar, bleach, alcohol, acidic and abrasive agents. All this can damage the surface.
Choose pH‑neutral solutions and soft microfiber cloths. Do not use too much detergent — it may leave streaks on the surface. A steam cleaner will help to cope with particularly difficult dirt on the stone floor.
